Make an Active SCAP Call Private
After you make a call public and allow group members to bridge in to the call, you can make the call
private to prevent more group members from bridging in to the call.
Procedure
1. During an active bridge call, select Private.
The call is now private and other group members cannot bridge in to the call.
Holding or Passing SCAP Calls
You can choose to hold or pass a call on the shared SCAP line. When you place a call on hold, the call is
held on your phone. You are the only one that can view the held status of the call and resume the call.
Passing a call enables other group members to resume the call on the shared line.
Pass an SCAP Call
When you pass a call, you enable SCAP group members to view the held status of the call and resume
the call.
You cannot pass active bridge calls on the shared line.
Procedure
1. During an active call, select Pass.
The call is placed on hold and all members on the shared line can view and resume the passed
call.
Resume a Passed SCAP Call
Any group member can resume a passed call on the shared line.
When an active call is passed on the shared line, all group members are notified of the call's new status
by a flashing red LED light on the line key on all members' phones, if enabled by your system
administrator.
When a passed call is resumed by another group member, the other group members are notified of the
call's new status with a steady red LED light on the line key on the members' phone.
Procedure
1. Do one of the following:
•
Select the corresponding line key and lift the handset.
•
Press and hold the corresponding line key and select Resume.
BroadSoft UC-One Simultaneous Ring
When your phone is registered with a BroadWorks server and you are signed into the phone with your
BroadSoft UC-One credentials, you can use the Simultaneous Ring feature to add a list of up to 10
extensions and phone numbers that will ring simultaneously when you receive an incoming call on your
line.
Polycom, Inc.
Shared Lines
62