Managing Calls Remotely; Managing Calls With Broadsoft Uc-One Broadworks Anywhere - Polycom VVX 150 User Manual

• Select End Call to end a call with a contact. You can end active calls only, so resume the
held call first before ending it.
• Select Transfer to send the call to another contact.
• Select Conference to initiate a conference call.

Managing Calls Remotely

When your VVX phone is registered with a BroadWorks server and you are signed in to the phone with
your BroadSoft UC-One credentials, you can manage calls to your line remotely from any of your phones
using the BroadWorks Anywhere or Remote Office features.
With these features, you can handle any incoming calls to your office phone on other phones or mobile
devices and move calls from your mobile device to your desk phone without ending the call.
Check with your system administrator to find out if these features are available on your phone.

Managing Calls with BroadSoft UC-One BroadWorks Anywhere

BroadWorks Anywhere is a BroadSoft UC-One feature that enables you to use one phone number to
receive calls on your desk phone, mobile phone, or home office phone and place calls from any of these
phones using one number.
BroadWorks Anywhere also enables you to move calls between your desk phone and mobile phone as
well as perform any additional functions, such as intercom calls that you would make from your desk
phone.
Contact your system administrator or service provider for more information on using BroadWorks
Anywhere.
Enable BroadWorks Anywhere
You can enable BroadWorks Anywhere on VVX phones, add locations that act as duplicates of your desk
phone, and manage all your calls from those locations. VVX phones support up to 10 phone numbers
added as BWA locations for each registered line.
You can save a location name, primary number, and alternate number for each location you add. When
you add a location, you can also choose to enable the following settings:
• Diversion Inhibitor—Determines if diversion inhibitor must be enabled when extending a call to the
remote BWA location.
• Answer Confirmation Required —Requires confirmation when a call is answered by a remote
location.
• Call Control—Determines if call control is handled by the BWA location or by the BroadWorks
server.
Procedure
1. Select UC-One on the Home screen or navigate to Settings > Features > UC-One Call Settings.
2. Select a line.
3. Select BroadWorks Anywhere and press Add.
4. Enter information for the Status, Name, Primary Number, and Alt. Number/SIP URI fields, if
applicable.
Polycom, Inc.
Audio Calls
43