How Write A Value; How Read A Value - CD Automation REVO TC Communications Manual

REVO-TC / TU-RS485-PNT0TCMxx Communication Manual

3.1 How Write a value

To write a value need
1) Set Byte offset 2 fixed to 0
2) Set Byte offset 4 (Address) fixed to 1
3) Set Byte offset 6 (Function) to value 6
4) Set Byte offset 8 (Par Number) number of parameters in column "Parameter Number"
5) Set Byte offset 10 (Value to write)
6) To send the value increase the offset 0 (transmission number)

3.2 How Read a value

To Read a value need
1) Set Byte offset 2 fixed to 0
2) Set Byte offset 4 (Address) fixed to 1
3) Set Byte offset 6 (Function) to value 3
4) Set Byte offset 8 (Par Number) number of parameters in column "Parameter Number"
5) To send the value increase the offset 0 (transmission number)
20