266CRH / 266CRT, 266CSH / 266CST MULTIVARIABLE PRESSURE TRANSMITTER | OI/266CXX/MODBUS-EN REV. A
5 Transport and storage
Transport safety instructions
Observe the following instructions:
•
Do not expose the device to humidity during transport.
Pack the device accordingly.
•
Pack the device so that it is protected against vibrations
during transport, for example, by using air-cushioned
packing.
Inspection
Check the devices immediately after unpacking for possible
damage that may have occurred from improper transport.
Details of any damage that has occurred in transit must be
recorded on the transport documents.
All claims for damages must be submitted to the shipper
without delay and before installation.
Identification
Identify the device in accordance with the instructions in
Product identification on page 13 to ensure it is the right device.
Handling
Special precautionary measures are not required for handling of
the device. However, standard procedures must be complied
with.
Storing the device
Bear the following points in mind when storing devices:
•
Store the device in its original packaging in a dry and
dust-free location.
•
Observe the permitted ambient conditions for transport
and storage.
•
Avoid storing the device in direct sunlight.
•
In principle, the devices may be stored for an unlimited
period. However, the warranty conditions stipulated in
the order confirmation of the supplier apply.
Ambient conditions
Models 266Cxx – Transport and storage
Ambient temperature range
Relative humidity
Returning devices
For the return of devices, follow the instructions in Repair on
page 82.
50 to 85 °C ( 58 to 185 °F)
With integrated digital display (LCD):
40 to 85 °C ( 40 to 185 °F)
Up to 75 %
15