Table of Contents
Advertisement
48
266CRH / 266CRT, 266CSH / 266CST MULTIVARIABLE PRESSURE TRANSMITTER | OI/266CXX/MODBUS-EN REV. A
... 8 Operation
... Selecting and changing parameters
Parameter name
12.3456 [unit]
Next
3. Use
to select the decimal place to change.
4. Use
/
to set the desired value.
5. Use
to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
Alphanumeric entry
When an alphanumeric entry is made, a value is set by entering
the individual decimal positions.
Menu name
Parameter name
Currently set value
Next
1. Select the parameters you want to set in the menu.
2. Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Parameter name
ABC.........
ABCDEFGHIJKLMOPQ
Next
3. Use
to select the decimal place to change.
4. Use
/
to set the desired value.
5. Use
to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
Change from two to one column
OK
Edit
OK
Exiting the setup
For some menu items, values must be entered. If you don't want
to change the parameter, you can exit the menu as described
below.
1. Pressing
(Next) repeatedly moves the cursor to the right.
Once the cursor reaches the end position, 'Cancel' is
displayed in the lower right of the screen.
2.
terminates editing and exits the menu item. Use
return to the start.
Note
The LCD display automatically returns to the process display
three minutes after the last button has been actuated.
to
Advertisement
Table of Contents
