Printing From Other Programs - Brady BradyJet J2000 User Manual

Printing from Other Programs

Since this printer uses a standard Windows printer driver you can print from any application you would
like. There are just a few things to remember that will make it much easier.
1. Set the Page/Label Size in the Driver. Brady Workstation fills in the size of the label that you
are using. When printing from any other program you must do this manually. Before you print,
simply set the Paper Size just as you would set print quality in the printing preferences. In the
example below the label size is 4" x 4" so the custom page size is set to 400 x 400 (displayed
in 0.01 inch units).
2. Check the image or document size. The image size or document size should correspond to
the Page/Label Size set in the driver. If you have set your page size in the driver to 4" x 4" but
your image is actually 5" x 3" the printer driver will automatically shrink your image to fit inside
the 4" x 4" label. The result is that the actual printed label is 4" x 2.4". Avoid this by setting your
page size in the driver and image size in the printing application to match the label size
installed in the printer.
BradyJet J2000 Color Label Printer
Printing Labels
Printing from Other Programs
24