Brady BradyJet J2000 User Manual page 21

Using System Tools
Output or Cut Mode
Cut after button press This setting will cut after you press the load / feed button on the printer. This
can be used after one label or an entire job. This feature is useful if you will not be present at the end
of the print to catch the cut label.
Cut every label This setting will cut after every label.
Cut after specified number of labels This option will cut after the number of labels specified in the
"Cut After Labels" setting above. Change the value and then click "Set" to send it to the printer.
BradyJet J2000 Color Label Printer
15