Care For The Detection Pin And The Attachment For Detection - Roland DWX-30 User Manual

Cleaning the dust tray
After operation, dispose of any cutting waste that has collected in the dust tray.
Cleaning inside of the dust collection capsule
When cutting is finished, fix the cleaning nozzle to the dust collection hose C and remove the cover of the
dust collection capsule to clean the machine.
Dust collection hose C
Cap

Care for the Detection Pin and the Attachment for Detection

Take care of the detection pin and the attachment for detection on a routine basis. The detection pin or the
attachment that gathers rust or dust will prevent the accurate detection, which may result in the situation
where you cannot perform cutting as intended or where the machine should be damaged.
Care, Maintenance, and Storage Methods
 After use, wipe clean using a clean cloth, apply rust-preventive oil generously, and store.
 When the item will be out of use for a prolonged period, store in a location with low humidity and little
fluctuation in temperature.
Dust tray
By turning the top, you can make it ap-
plicable to sweeping or vacuuming.
Cleaning nozzle
5-1 Maintenance
Chapter 5 Appendix
85