2-1 Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Collet
Collet
Power cord(1)
Handy panel(1)
(diameter 3.175 mm)
(diameter 4.0mm)(1)
(1)
Collet
Spanner (10 mm,
Hexagonal driver(1)
Hexagonal wrench (1)
(diameter 3.0mm) (1)
17mm) (one for each)
Attachment for detec-
Detection pin (1)
Cap* (1)
Spacer (1)
tion (1)
Clamp C-1 for block
Clamp C-2 for block
Clamp D-1 for block
Clamp D-2 for block
workpiece (1)
workpiece (1)
workpiece (1)
workpiece (1)
Dust collection hose
Dust collection hose
Dust collection hose
Dust tray (1)
A (1)
B (1)
C (1)
*Note: The cutting machine is shipped from the factory with these parts installed on it.
32
Chapter 2 Installation and Setup