Detection Pin And Dummy Pin - Roland DWX-4W Setup Manual

Detection Pin and Dummy Pin

Two detection pins are included with this machine, one for milling and one for correction. Although the shape
and features of the pins are identical, if a detection pin is used for milling even once, it cannot be used for
correction. Make sure to always use the pin for its intended use.
 Pin for milling (Called the "dummy pin for milling" in this manual and in the user's manual.)
Because a malfunction will occur if the collet does not grip anything when processing, this pin is used as
a dummy pin. Use the pin that is attached upon shipment.
 Pin for correction (Called the "detection pin for correction" in this manual and in the user's manual.)
This pin is used when performing maintenance in order to correct the position of the rotary axis. Use the
pin that is shipped together with the machine as an included item.
Make sure to keep the pins separate and to never mistake which is for milling and which
is for correction.
If a detection pin is used for milling even once, it cannot be used to provide proper correction. If for
some reason a detection pin for correction is used for milling, a new detection pin for correction will
be necessary. In such cases, contact your authorized Roland DG Corporation dealer.
Checking the Part Names and Included Items
1. Getting Started
27