Table of Contents
Advertisement
Quitting Cutting
This stops cutting through operation using the built-in panel. Unlike pausing operation, cutting cannot be
resumed.
Procedure
3-4 Pausing and Quitting Cutting
Press the PAUSE button during cutting.
Movement of the tool pauses. The PAUSE light
comes on and the READY light flashes. Rotation of
the spindle does not stop at this time.
Hold down the CANCEL button for two
seconds or longer.
When the PAUSE light goes dark and the READY
light is lighted, cutting has completed stopping.
Rotation of the spindle stops at this time.
Chapter 3 Basic Operation
61
Advertisement
Table of Contents
