Starting And Stopping Spindle Rotation; Starting Or Stopping The Spindle - Roland DWX-30 User Manual

3-3 Starting and Stopping Spindle Rotation

Starting or Stopping the Spindle

This displays the present rotating
speed of the spindle.
Settable range: 6,000 to 30,000 rpm
Setting the Spindle Speed During Cutting
The spindle's rotating speed during cutting operations is controlled by commands in the cutting data sent
from the computer, and so the setting made in VPanel is ignored. Note, however, that the setting made with
VPanel is used when the cutting data contains no command specifying the spindle speed, or if the setting
is made again in VPanel while cutting is in progress. You can also use VPanel's override feature to adjust the
speed of spindle rotation during cutting.
 P. 80, "Override"
Operation Using the Handy Panel
You can start and stop spindle rotation using the handy panel. Changing the speed of rotation using the
handy panel is not possible.
 P. 62, "Using the Handy Panel"
58
Chapter 3 Basic Operation Chapter 3 Basic Operation
Close the front covers and click
The spindle begins to rotate.
Clicking
tion.
You can adjust the spindle's
speed of rotation.
a second time stops the spindle rota-
.