Mounting The Workpiece - Roland DWX-30 User Manual

4-2 Preparation for and Performing Cutting

Mounting the Workpiece

Procedure

Close the front covers and press the VIEW button.
 P. 57, Moving to the VIEW Position

Remove the cover of the dust collection capsule if it is attached.

Mount the workpiece on the main-clamp.
The sub clamp (s) varies according to the type of the workpiece. Mount according to the order shown in
the figure and tighten the cap at the end.
In the case of a Disc workpiece
Without levels
74
Chapter 4 Performing Cutting
With levels
Cap
workpiece
Main-clamp