Table of Contents
Advertisement
1-2 Part Names and Functions
Handy Panel and Built-in Panel
You operate this machine using either the handy panel connected to the cutting machine by a cable, or the
machine's built-in panel.
Operation
buttons
LEDs
Dial
Status Indicated by the LEDs for the Built-in Panel
Name
POWER
READY
ERROR
PAUSE
( n e x t t o t h e
PAUSE button)
30
Chapter 1 Getting Started
Handy panel
P. 62, "Using the Handy Panel"
LED state
Lighted
Dark
Lighted
Flashing
Dark
Flashing slowly
Flashing rapidly
Lighted
Built-in panel
Machine status
The main power is on.
The main power is off.
The sub power is on.
Initializing.
The front cover is open.
Tool movement is in progress.
The spindle is rotating.
Cutting is in progress.
During stopping cutting
Note: When the cutting data is sent during initialization
and stopping cutting from the computer, the machine
accepts no cutting data.
The sub power is off.
A warning (nonfatal error) has occurred. (A description
of the error is displayed in VPanel.)
An error resulting in an emergency stop has occurred. (A
description of the error is displayed in VPanel.)
Operation is paused.
LEDs
Sub power button
P. 50, "How to Start
the Machine"
PAUSE button
P. 59, "Pausing and
Quitting Cutting"
VIEW button
P. 57, "Moving to the
VIEW Position"
CANCEL button
P. 61, "Quitting Cut-
ting"
Advertisement
Table of Contents
