Table of Contents
Advertisement
Based on the two setups mentioned in
combines the setups and illustrates the difference in RF energy transmitted by the
pairing device and DUT.
The N6781A SMU unit has a limit of 13 dBm. It is recommended to add a fixed
NOTE
attenuator when you require an input power of more than +10 dBm to avoid
overstress.
The 1x2 Splitter within the X8712AD responds and produces different power levels
in time domain compared to the upper and lower threshold as illustrated in the
chart below. You can see this chart in the Zoom Chart on
22
Shield Box
DUT
Uplink
Pairing Device
RF (dBm)
page 19
and
X8712A RF Power kit
Refer to Note.
Downlink
page
21, the diagram below
page
49.
DUT
Pairing Device
Upper Threshold
Lower Threshold
Time
Keysight X8712A User's Guide
Advertisement
Table of Contents
