Table of Contents
Advertisement
Overview
KP-FM500WCL are Camera Link output type black and white camera which utilized the 2/3 –inch progressive scan
CMOS image sensor with square pixel. KP-FMD500WCL are RAW data output type.
The high resolution image of five million pixels is output in no interlace by 163 frames per second.
Because square pixel CMOS is adopted, the image that is appropriate for the picture processing is obtained.
Standard composition
Check when unpacking
Camera ······························································ 1
Written guarantee ················································· 1
Optional accessories
(1) 12 pin plug
(2) Junction box
(3) Tripod adaptor
(4) Mini-Camera Link cable
Features
High resolution
The 2/3-inch five million pixels square lattices CMOS achieve a high resolution.
Global shutter
The clear image is obtained even by subject with a fast movement by CMOS sensor adoption of the global shutter type.
Frame on demand
It is possible to import images according to arbitrary timing by the input of the trigger signal.
Change of frame rate
The frame rate can be changed by setting the camera link configuration and the camera link clock frequency. A further
frame rate can improve if partial scan and binning function is used.
Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to
44(W) x 44(H) x 41(D) mm / approx. 130g.
Automatic power supply change
The power supply through the Camera Link cable is possible from the PoCL frame grabber board. Because the power
supply from the DCIN/SYNC connector is also possible, it is possible to make the camera work by using usual frame
grabber board.
The power supply from the DCIN/SYNC connector is given to priority when the power supply is supplied from both.
HR10A-10P-12S
JU-F30/JC-100
TA-FM200
*If you do not use the specified optional item, malfunction may occur.
(5) Camera cable
Molded type
2m
C-201KSM
5m
C-501KSM
10m
C-102KSM
In the CE Marking or KCC region, use the shied type and
install clamp filter (ZCAT 2035-0930A: TDK) at both ends
(camera and video processor ends).
Shield type
C-201KSS
C-501KSS
C-102KSS
1
Advertisement
Table of Contents
