Hitachi KP-FM500WCL Operation Manual page 20

(3） Data transmitted by master (control abort process)
HITACHI
Slave
(KP-FM500WCL
KP-FMD500WCL)
① Master sends ENQ code to slave.
② Since ACK code cannot be sent, slave sent NACK code to master.
③ Sequence is repeated 3 times in attempts to retransmit.
After receiving the 3rd successive NACK code, communications control is aborted
(4） Data transmitted by master (data error process)
HITACHI
Slave
(KP-FM500WCL
KP-FMD500WCL)
① Session starts when ENQ is sent from master to slave.
② Slave acknowledges by returning ACK to master.
③ Master sends data, but slave detect error (framing, over-run error).
④ Slave detects error and does not accept data.
⑤ Sequence 3 and 4 repeats, then master transfers normal data.
⑥ Slave detects normal data and returns ACK code to master to end the session.
ENQ code (05h)
NACK code (15h)
2
ENQ code (05h)
NACK code (15h)
ENQ code (05h)
NACK code (15h)
ENQ code (05h)
NACK code (15h)
ENQ code (05h)
ACK code (06h)
2
Send data (error occurs)
Send data (error occurs)
4
Send data (data normal)
ACK code (06h)
6
1
3
Master (Machine)
1
3
3 second
elapse
3 second
elapse
5
Master (Machine)
11