Table of Contents
Advertisement
2.
Installation
2.1
Preparation for Installation
2.1.1
Unpacking and Inspection
The Model PH8EHP pH sensor is well packed so as to prevent damage during shipment.
After removing the sensor from its shipping container, visually check the sensor for damage.
NOTE
(1) When delivered, the "glass electrode" and the "liquid junction" are packed separate from the
sensor body.
(2) So that caps of the "glass electrode" and the "liquid junction" do not dry out, do not take unpack
these at this time.
MODEL
No.
Figure 2.1
Solution Ground Tip
Glass Electrode
Figure 2.2
PH8EHP -
03-TN-TT1-N-H*A
Made in Japan
An Example of Model Number Entering to Nameplate
Sensor Body
Liquid Junction
F2.2.ai
Names of PH8EHP pH Sensor Components
< 2. Installation >
F2.1.ai
IM 12B7J2-01E
2-1
11th Edition : Nov.20,2018-00
Advertisement
Table of Contents
