Clickshare Configuration Wizard - Barco ClickShare CS-100 Installation Manual

To access the Configurator via the Base Unit wireless network
1. On your laptop, connect to the Base Unit wireless network.
The default SSID and password to connect to the Base Unit are respectively 'ClickShare-<serial base
number>' and 'clickshare'.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.2.1.
A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
By default the password is set to 'admin'.
The web interface opens.
Older laptops might not support the 5 GHz Frequency Band. If your Base Unit is set to that
frequency range, those devices will not be able to connect to the Base Unit via the wireless network.
Overview of functions
Group
Personalization
Display & Audio
Wi-Fi & Network
Security
System
Support & Updates
When a setting is changed, always click Save changes to store the changes.

6.2 ClickShare Configuration Wizard

About the configuration wizard
During the first start up of the Base Unit, the configuration wizard starts up automatically.
Function
On-Screen ID
Wallpaper
Configuration Files
Display & Audio
Wi-Fi Settings
LAN Settings
Network integration (not for CS-100)
Services
Compatibility
Security levels
Passwords
Base Unit Status
Date & Time
Energy Savers
Buttons
Firmware
Troubleshoot
CS-100 Configurator
R5900022-09 ClickShare CS-100 53