Barco ClickShare CS-100 Installation Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector Accessories
  5. ClickShare CS-100
  6. Installation manual

Barco ClickShare CS-100 Installation Manual

Hide thumbs Also See for ClickShare CS-100:
Table of Contents

Advertisement

Quick Links

ClickShare CS-100
Installation manual
ENABLING BRIGHT OUTCOMES

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ClickShare CS-100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barco ClickShare CS-100

Summary of Contents for Barco ClickShare CS-100

  • Page 1 ClickShare CS-100 Installation manual ENABLING BRIGHT OUTCOMES...
  • Page 2 Product revision Software Revision: 1.6 Registered address: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com...
  • Page 3 Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
  • Page 4 ClickShare applications (each a “Barco ClickShare Product”). • Term The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare Product, for as long as you operate such Barco ClickShare Product. •...
  • Page 5 • Retention of data Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of this EULA. BARCO END USER LICENSE AGREEMENT By accepting these terms (through tick box or other mechanism designed to acknowledge agreement to the...
  • Page 6 You may own the carrier on which the Software is provided, but the Software is owned and copyrighted by Barco or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights in the...
  • Page 7 Software. You agree to install any maintenance releases to address bugs or security issues in the Software if the same are being provided to you. Barco will keep you informed as of when earlier versions of the Software are no longer serviced.
  • Page 8 6.4 Remedy. If the breach is not cured within the applicable remedy period (or cannot be cured at all), Barco shall have the option (i) to cause you to procure such additional licenses required as per the actual usage;...
  • Page 9 (especially for components that you provide or control). Barco disclaims any liability for any data not provided by Barco, or any use of the Software outside the intended use as per this License Agreement or an applicable data processing annex.
  • Page 10 ( http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app). Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the products which are connected through the Software, and/or (ii) as provided by you or generated by your use of the Software (“Functional Information”).
  • Page 11 input-event-daemon https://github.com/gandro/input-event-daemon/archive/v0.1.3 iperf http://downloads.sourceforge.net/project/iperf2 iptables http://ftp.netfilter.org/pub/iptables https://cdn.kernel.org/pub/software/network/iw jpeg-turbo http://downloads.sourceforge.net/project/libjpeg-turbo/1.5.1 json-c https://github.com/json-c/json-c/archive/json-c-0.12-20140410 https://cdn.kernel.org/pub/linux/utils/kernel/kmod kmod http://downloads.sourceforge.net/project/lame/lame/3.100 lame http://www.libarchive.org/downloads libarchive ftp://ftp.gnupg.org/gcrypt/libassuan libassuan http://libbsd.freedesktop.org/releases libbsd https://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2 libcap libconfig http://www.hyperrealm.com/libconfig https://curl.haxx.se/download libcurl http://0pointer.de/lennart/projects/libdaemon libdaemon https://github.com/robclark/libdri2/archive/ libdri2 4f1eef3183df2b270c3d5cbef07343ee5127a6a4 http://dri.freedesktop.org/libdrm libdrm http://www.thrysoee.dk/editline libedit libepoxy https://github.com/anholt/libepoxy/archive/v1.3.1 http://libestr.adiscon.com/files/download libestr http://dist.schmorp.de/libev/Attic libev http://www.freedesktop.org/software/libevdev...
  • Page 12 libqrencode http://fukuchi.org/works/qrencode libresample ftp://ftp.ubuntu.com/ubuntu/pool/universe/libr/libresample libsamplerate http://www.mega-nerd.com/SRC https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/releases/ libselinux 20161014 https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/releases/ libsepol 20161014 https://github.com/dottedmag/libsha1/archive/0.3 libsha1 http://www.mega-nerd.com/libsndfile/files libsndfile http://ftpmirror.gnu.org/libtool libtool https://github.com/libusb/libusb/releases/download/v1.0.20 libusb http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat- libusb-compat 0.1.5 http://linuxtv.org/downloads/v4l-utils libv4l http://www.freedesktop.org/software/vaapi/releases/libva libva libvdpau http://people.freedesktop.org/~aplattner/vdpau http://downloads.xiph.org/releases/vorbis libvorbis http://xcb.freedesktop.org/dist libxcb http://xkbcommon.org/download libxkbcommon ftp://xmlsoft.org/libxml2 libxml2 libyaml http://pyyaml.org/download/libyaml lighttpd http://download.lighttpd.net/lighttpd/releases-1.4.x https://www.kernel.org/pub/linux/kernel/v4.x/ linux...
  • Page 13 procps-ng http://downloads.sourceforge.net/project/procps-ng/Production protobuf https://github.com/google/protobuf/archive/v2.6.1 pulseaudio http://freedesktop.org/software/pulseaudio/releases python3 http://python.org/ftp/python/3.5.2 https://pypi.python.org/packages/4a/85/ python-pyyaml db5a2df477072b2902b0eb892feb37d88ac635d36245a72a6a69b23b383a https://pypi.python.org/packages/ce/9c/ python-serial 694ce79a9d4a164e109aeba1a40fba23336f3b7554978553e22a5d41d54d qt5base http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5declarative http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5imageformats http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5multimedia http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5quickcontrols http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5serialport http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5svg http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5websockets http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5x11extras http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules qt5xmlpatterns http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules http://ftpmirror.gnu.org/readline readline rsync http://rsync.samba.org/ftp/rsync/src rsyslog http://rsyslog.com/files/download/rsyslog http://sourceforge.jp/projects/efont/downloads/10087 sazanami-fonts http://downloads.us.xiph.org/releases/speex...
  • Page 14 xcb-util-keysyms http://xcb.freedesktop.org/dist http://xcb.freedesktop.org/dist xcb-util-wm xdata_xbitmaps http://xorg.freedesktop.org/releases/individual/data xdriver_xf86-input- http://xorg.freedesktop.org/releases/individual/driver evdev xdriver_xf86-video- amdgpu http://xorg.freedesktop.org/releases/individual/driver xfont_encodings http://xorg.freedesktop.org/releases/individual/font xfont_font-alias http://xorg.freedesktop.org/releases/individual/font xfont_font-cursor-misc http://xorg.freedesktop.org/releases/individual/font xfont_font-misc-misc http://xorg.freedesktop.org/releases/individual/font xfont_font-util http://xorg.freedesktop.org/releases/individual/font xkeyboard-config http://www.x.org/releases/individual/data/xkeyboard-config http://xorg.freedesktop.org/releases/individual/lib xlib_libfontenc xlib_libICE http://xorg.freedesktop.org/releases/individual/lib xlib_libSM http://xorg.freedesktop.org/releases/individual/lib http://xorg.freedesktop.org/releases/individual/lib xlib_libX11 xlib_libXau http://xorg.freedesktop.org/releases/individual/lib xlib_libXaw http://xorg.freedesktop.org/releases/individual/lib xlib_libXcomposite http://xorg.freedesktop.org/releases/individual/lib http://xorg.freedesktop.org/releases/individual/lib xlib_libXcursor xlib_libXdamage http://xorg.freedesktop.org/releases/individual/lib xlib_libXdmcp...
  • Page 15 xproto_fontsproto http://xorg.freedesktop.org/releases/individual/proto xproto_glproto http://xorg.freedesktop.org/releases/individual/proto xproto_inputproto http://xorg.freedesktop.org/releases/individual/proto xproto_kbproto http://xorg.freedesktop.org/releases/individual/proto http://xorg.freedesktop.org/releases/individual/proto xproto_presentproto xproto_randrproto http://xorg.freedesktop.org/releases/individual/proto xproto_renderproto http://xorg.freedesktop.org/releases/individual/proto xproto_resourceproto http://xorg.freedesktop.org/releases/individual/proto xproto_scrnsaverproto http://xorg.freedesktop.org/releases/individual/proto xproto_videoproto http://xorg.freedesktop.org/releases/individual/proto xproto_xcmiscproto http://xorg.freedesktop.org/releases/individual/proto http://xorg.freedesktop.org/releases/individual/proto xproto_xextproto xproto_ xf86bigfontproto http://xorg.freedesktop.org/releases/individual/proto xproto_xf86dgaproto http://xorg.freedesktop.org/releases/individual/proto http://xorg.freedesktop.org/releases/individual/proto xproto_xf86driproto xproto_ xf86vidmodeproto http://xorg.freedesktop.org/releases/individual/proto http://xorg.freedesktop.org/releases/individual/proto xproto_xineramaproto xproto_xproto http://xorg.freedesktop.org/releases/individual/proto xserver_xorg-server https://xorg.freedesktop.org/archive/individual/xserver http://invisible-mirror.net/archives/xterm xterm xutil_util-macros...
  • Page 16 The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
  • Page 17 Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l'appareil de sans fil Barco est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.

  • Page 19: Table Of Contents

    6 CS-100 Configurator ....................................49 Accessing the Configurator.................................50 ClickShare Configuration Wizard.............................53 On-Screen Language and Text Size ............................56 Meeting room information ................................58 Personalisation, wallpaper ................................59 Personalisation, Personalized wallpaper ..........................60 Manage configuration files................................62 Display setup.......................................64 Audio settings .....................................64 6.10 WiFi settings ......................................65 R5900022-09 ClickShare CS-100...
  • Page 20 6.21 Support & Updates, Troubleshoot, log settings .......................77 6.22 Factory defaults ....................................78 7 Firmware updates ......................................81 Firmware update ....................................82 8 Troubleshooting......................................83 Troubleshooting list..................................84 9 Environmental information ..................................87 Disposal information..................................88 Rohs compliance....................................88 Production address..................................90 Importers contact information ..............................90 R5900022-09 ClickShare CS-100...

  • Page 21: Introduction To The Installation Guide

    Introduction to the Installation Guide In this section you get a short introduction to the available CS-100 documentation. • Documentation • Symbols and fonts R5900022-09 ClickShare CS-100...

  • Page 22: Documentation

    API Guide R5900018 A printed copy of the Safety Guide is included in the CS-100 box at purchase. User and installation manuals can be downloaded from Barco’s website, www.barco.com/clickshare. Always check for the latest version of the manual on www.barco.com/clickshare Depending on the CS-100 version, some graphics might be different to the ones used in this manual.
  • Page 23 Introduction to the Installation Guide • Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon. R5900022-09 ClickShare CS-100...
  • Page 24 Introduction to the Installation Guide R5900022-09 ClickShare CS-100...

  • Page 25: Cs-100 Specifications

    It gives an overview of the specifications of a CS-100 set. and of the different components in the set. Overview • About the CS-100 • CS-100 specifications • About the Base Unit • About the Button • Mobile Device Support • Ports used by the CS-100 Base Unit R5900022-09 ClickShare CS-100...

  • Page 26: About The Cs-100

    Printed safety manual R9861500D01 1x R9861500D01 R9861500D01C 1x R9861500D01C Contact your local sales representative for the correct regional variant to be used in your country. xx=EU, CN, NA, Included AC clips can be different according to the region R5900022-09 ClickShare CS-100...

  • Page 27: Cs-100 Specifications

    Storage: -20°C to +60°C (-4°F to +140°F) Humidity Storage: 0 to 90% relative humidity, non-condensing Operation: 0 to 85% relative humidity, non-condensing Anti-theft system Kensington lock Certifications FCC/CE Warranty 3 years standard Google Cast Support Google Cast not supported R5900022-09 ClickShare CS-100...

  • Page 28: About The Base Unit

    Kensington lock USB port The USB port is used to update the soft- and firmware of both the Base Unit and the Buttons. For more information about software update via USB port, see “Firmware update”, page 82. R5900022-09 ClickShare CS-100...
  • Page 29 To update the Base Unit software, download the latest version of the software from the Barco website. Copy the file on a USB stick and plug it into the USB port of the Base Unit. Follow the progress and instructions on the display.

  • Page 30: About The Button

    The antenna is built-in in the CS-100. Bottom layout of the Base Unit The serial number label containing the Barco part number, the revision number, production date (week-year) and the serial number. The product label with the applicable certification logos.
  • Page 31 USB port or computer might be defective. Button label The label at the bottom of the Button contains: • the Barco logo • the Barco part number • the serial number • the revision number • markings for applicable standards •...

  • Page 32: Mobile Device Support

    Logo Used on ClickShare App Android 2.6 Ports used by the CS-100 Base Unit Overview Sender CS-100 Base Unit ClickShare 6541; 6542; 6543; 6544; 6545 Button ClickShare 6541; 6542; 6543; 6544; 6545 Presenter 5353 WebUI 80; 443 R5900022-09 ClickShare CS-100...

  • Page 33: Getting Started

    Getting started Overview • Environmental Condition Check • Basic Workflow R5900022-09 ClickShare CS-100...

  • Page 34: Environmental Condition Check

    For more information on the different ways to configure CS-100, see “CS-100 Configurator”, page 49. For more information on using CS-100, refer to the CS-100 User Guide. This manual can be found on Barco's website www.barco.com/clickshare Click on Visit the ClickShare product page and go to tab Downloads..

  • Page 35: Cs-100 Installation

    CS-100 Installation Overview • Installation methods for the Base Unit • Table mounting • Wall mounting • Video signal connections to the Base unit • Audio connection • LAN connection • Power connection R5900022-09 ClickShare CS-100...

  • Page 36: Installation Methods For The Base Unit

    Screwdriver (depending on the used screws) Required parts • 2 mounting screws, maximum head diameter of 6.5 mm • 2 plugs How to install Drill two holes in the wall or ceiling as indicated on the drawing. Horizontal distance : 162 mm, R5900022-09 ClickShare CS-100...

  • Page 37: Video Signal Connections To The Base Unit

    Note: No display cables are included in the ClickShare box at purchase. When setting up a display configuration, connect the HDMI cable to the display. When necessary, use an adapter piece to connect to a display port or a DVI port on the display side. R5900022-09 ClickShare CS-100...

  • Page 38: Audio Connection

    The Base Unit can be connected to a local network or directly to a laptop. For normal operation, a LAN connection is not necessary. The LAN connection can be used: • to configure your CS-100 Base unit • to update the software R5900022-09 ClickShare CS-100...

  • Page 39: Power Connection

    Slide a power input adaptor piece (US, CN, EU or UK) on the power adapter of the ClickShare . Use the one which is applicable in your country. Slide down the button on the adapter (1). Insert the latch (2) of the adapter piece into notch (3) R5900022-09 ClickShare CS-100...
  • Page 40 CS-100 Installation Image 4-3: Mounting adapter piece Image 4-4: Type A Image 4-5: Type A R5900022-09 ClickShare CS-100...
  • Page 41 CS-100 Installation Image 4-6: Type C Image 4-7: Type G Image 4-8: Type I Connect the power cable to the wall outlet. R5900022-09 ClickShare CS-100...
  • Page 42 CS-100 Installation R5900022-09 ClickShare CS-100...

  • Page 43: Preparing The Buttons

    Preparing the buttons Overview • Pairing • ClickShare Extension Pack • ClickShare Extension Pack installer R5900022-09 ClickShare CS-100...

  • Page 44: Pairing

    You can unplug the Button from the Base Unit. • When the LEDs become static red, the Button is paired to the Base Unit and the software update has finished. You can unplug the Button from the Base Unit. R5900022-09 ClickShare CS-100...

  • Page 45: Clickshare Extension Pack

    Base Unit without plugging the Buttons to the Base Unit. The Buttons are plugged in to your laptop. For more information about the Button Manager, consult the Button Manager’s user guide which can be downloaded from Barco’s website. 5.2 ClickShare Extension Pack About The ClickShare Extension Pack is a collection of tools to upgrade your ClickShare user experience.
  • Page 46 In this setup, a user or an IT admin can install the ClickShare Extension pack using the Windows command prompt. Following is an example of a silent installation (version numbers are only given as example, always check Barco’s web for the latest version): Launcher only install: msiexec.
  • Page 47 Preparing the buttons The variable to be used is CLICKSHARE_LAUNCHER_CLIENT_PATH. The value should be the path to the client software. R5900022-09 ClickShare CS-100...
  • Page 48 Preparing the buttons R5900022-09 ClickShare CS-100...

  • Page 49: Cs-100 Configurator

    Energy savers • Buttons • Firmware Update • Support & Updates, Troubleshoot, log settings • Factory defaults Within some menus the Configurator is indicated as WebUI. E.g. WebUI password, that is the password to enter the Configurator. R5900022-09 ClickShare CS-100...

  • Page 50: Accessing The Configurator

    Note: The Wired IP address is only visible when the Base Unit is connected to the LAN. A login screen appears. Image 6-1: Login screen To change the language of the Configurator, click on the drop down next to the current selected language and select the desired language. R5900022-09 ClickShare CS-100...
  • Page 51 Warning: It is strongly recommended to change the default password into a strong password on first use, to prevent that anyone else accessing the configurator can change the settings of the ClickShare Base Unit. See section “Security, passwords”. The configurator opens. R5900022-09 ClickShare CS-100...
  • Page 52 Note: Supported browsers are Internet Explorer, Firefox and Safari. Browse to http://192.168.1.23. A login screen appears. Enter the user name 'admin' and the password, read and accept the EULA and click OK. By default the password is set to 'admin'. The configurator opens. R5900022-09 ClickShare CS-100...

  • Page 53: Clickshare Configuration Wizard

    Troubleshoot When a setting is changed, always click Save changes to store the changes. 6.2 ClickShare Configuration Wizard About the configuration wizard During the first start up of the Base Unit, the configuration wizard starts up automatically. R5900022-09 ClickShare CS-100...
  • Page 54 All basic settings necessary to configure the Base Unit are covered by the configuration wizard. Once the configuration wizard is finished, the Base Unit is ready to be used. Image 6-4: Configuration wizard To start the wizard, click on Start Configuration. R5900022-09 ClickShare CS-100...
  • Page 55 See “Meeting room information”, page 58. welcome message System Time zone, manual time setup See “Date & Time setup, manually”, page Use NTP See “Date & Time setup, time server”, page Network Frequency band, channel Wi-Fi passphrase See “WiFi settings”, page 65. R5900022-09 ClickShare CS-100...

  • Page 56: On-Screen Language And Text Size

    About the on-screen language. The on-screen language can be set independent of the configurator language. The on-screen text size can be changed between small, medium or large. Language selection Log in to the Configurator Click Personalisation → On-Screen ID. R5900022-09 ClickShare CS-100...
  • Page 57 Log in to the Configurator Click Personalisation → On-Screen ID. Click on the drop down box next to On-screen text size and select the desired font size. The following sizes are possible: • Small • Medium • Large R5900022-09 ClickShare CS-100...

  • Page 58: Meeting Room Information

    Show on-screen information Log in to the Configurator. Click Personalisation → On-screen ID. Check the check box in front of Show meeting room info. Checked: meeting room name, location and welcome message are displayed on-screen when nothing is shared. R5900022-09 ClickShare CS-100...

  • Page 59: Personalisation, Wallpaper

    The Wallpaper selection pane is shown. The current selected wallpaper is shown with a red border. Select one of the available wallpapers and click on Save Changes. Note: By default a general Barco CS-100 wallpaper and a CS-100 Quick Start Guide wallpapers are available.

  • Page 60: Personalisation, Personalized Wallpaper

    Log in to the Configurator Click Personalisation → Wallpaper. The Wallpaper selection pane is shown. The current selected wallpaper is shown with a red border. Hoover your mouse over the free place and click on Choose image. R5900022-09 ClickShare CS-100...
  • Page 61 Click on Save changes to apply the personalized wallpaper The message Successfully applied changes is displayed on top of the page. Change personalized image Click Personalisation → Wallpaper. Hoover your mouse over the current personalized image and click Change image. R5900022-09 ClickShare CS-100...

  • Page 62: Manage Configuration Files

    About Manage configuration files A full backup can be downloaded but cannot be used to duplicate configuration settings to other Base units. Therefore, it is possible to download a Portable version. This portable version can be uploaded via the upload R5900022-09 ClickShare CS-100...
  • Page 63 Base Unit of the same model. When uploading a config file, the history of software updates and paired Buttons is lost. Paired buttons will however remain functional if the Base Unit has not changed from SSID or wireless password. R5900022-09 ClickShare CS-100...

  • Page 64: Display Setup

    The audio functionality can be disabled or enabled. When the enable and/or disable setting is changed, the Buttons must be re-paired before the setting becomes active. Image 6-16: Audio settings Audio disabling or enabling will require a repairing of the Buttons used with this Base Unit. R5900022-09 ClickShare CS-100...

  • Page 65: Wifi Settings

    The transmission power of the wireless signal can be reduced. Image 6-17: WiFi settings Changing the IP address will require a repairing of the Buttons used with this Base Unit. IP address & subnet mask Log in to the Configurator. R5900022-09 ClickShare CS-100...

  • Page 66: Lan Settings

    Checked: Configurator accessible via Wi-Fi. Not checked: access to the configurator via Wi-Fi is blocked. 6.11 LAN settings About LAN network settings A network connection can be configured through DHCP or by manually entering a fixed IP address. R5900022-09 ClickShare CS-100...
  • Page 67 The IP address, subnet and gateway input fields are activated. Click in the input field of the IP address and fill out the 4 octets. Note: An address contains 4 octets with a maximum value of 255. This must NOT be 0.0.0.0 for static IP-Address assignment R5900022-09 ClickShare CS-100...

  • Page 68: Services, Mobile Devices

    It is enabled by default. When the Base Unit is integrated in the corporate network, it may be required to disable content sharing from the ClickShare app. How to enable Log in to the Configurator. Click WiFi & Network → Services. R5900022-09 ClickShare CS-100...

  • Page 69: Services, Remote Button Pairing

    Base Unit to pair it. This functionality makes it easy to use any Button with any Base Unit. Before you can use the ClickShare Button Manager a password must be configured on each Base Unit. How to setup Log in to the Configurator. Click WiFi & Network → Services. Scroll to Remote Button Pairing. R5900022-09 ClickShare CS-100...

  • Page 70: Security, Password

    Image 6-22: Security, password Click in the WebUI Password pane in the input field next to Old password and enter the old password. Click in the input field next to New password and enter a new password. R5900022-09 ClickShare CS-100...

  • Page 71: Status Information Base Unit

    When the reboot is finished, a re-login is necessary. 6.16 Date & Time setup, manually About Date & Time setup The date and time can be set manually using the time zone indication or using at least one NTP servers. R5900022-09 ClickShare CS-100...
  • Page 72 To change the month, click on the left or right arrows next the month name until the desired month and year are obtained. Click on a number in the number field to setup the day. To change the time, click in the time field next to Time. A window with 3 scroll counters open. R5900022-09 ClickShare CS-100...

  • Page 73: Date & Time Setup, Time Server

    Enter a NTP server address next to NTP servers. Enter the IP address or server name. Note: Multiple servers (maximum 5) can be added, separated by a comma. Click Save changes to apply. A synchronization with the NTP server takes place. The status field indicates the progress. R5900022-09 ClickShare CS-100...

  • Page 74: Energy Savers

    The Base Unit will wake up when the standby button on the Base Unit is pressed, or when the primary LAN interface remains active, a detection of HDMI input hot plug or button or app connecting with the Base Unit's primary LAN interface. Image 6-28: Energy savers R5900022-09 ClickShare CS-100...

  • Page 75: Buttons

    Image 6-29: Buttons 6.20 Firmware Update About Firmware update The firmware of the Base Unit can be updated via the web interface. The latest version of the firmware is available on Barco's website. R5900022-09 ClickShare CS-100...
  • Page 76 Browse to the file with the new firmware and click Open to start the upload. Note: This should be an .enc file. You might have to unzip the file downloaded from Barco's website. Note: Updating the software to the Base Unit takes several minutes. Progress can be followed on the meeting room display.

  • Page 77: Support & Updates, Troubleshoot, Log Settings

    CS-100 Configurator upgrading firmware via the Collaboration Management Suite, consult the Collaboration Management Suite’s user guide which can be downloaded from Barco’s website ( www.barco.com/clickshare). • Download the firmware on a USB stick and plug in this USB in your device. For more information, see “Firmware update”, page 82...

  • Page 78: Factory Defaults

    Debug logging and remote logging are disabled. Restoring to factory defaults will require a repairing of the Buttons used with this Base Unit. How to restore factory defaults Log in to the Configurator. Click Support & Updates → Troubleshoot. R5900022-09 ClickShare CS-100...
  • Page 79 If you want to continue, click Yes, remove all settings otherwise click No, I changed my mind. When yes is clicked, the system starts a reboot. Alternative way: The Base Unit can be reset to factory defaults by plugging in the power cable while pressing the reset button. R5900022-09 ClickShare CS-100...
  • Page 80 CS-100 Configurator R5900022-09 ClickShare CS-100...

  • Page 81: Firmware Updates

    Firmware updates R5900022-09 ClickShare CS-100...

  • Page 82: Firmware Update

    Barco’s website ( www.barco.com/clickshare). To update the Base Unit software by copying the software on a USB stick Download the latest version of the firmware from Barco's website, www.barco.com/clickshare. Click on Support and select the update firmware button of your device type.

  • Page 83: Troubleshooting

    Troubleshooting R5900022-09 ClickShare CS-100...

  • Page 84: Troubleshooting List

    • Use only a part of the display to show the video. • Right click ClickShare icon in system tray and click on Capture mode to toggle the current setting.. Wireless connectivity See “Users have bad connectivity” R5900022-09 ClickShare CS-100...
  • Page 85 Obstructions between Buttons and Base Unit cause lowering of the wireless strength and quality. Avoid placing it inside cabinets, false ceiling, below the table, behind a wall, in another room, ..R5900022-09 ClickShare CS-100...
  • Page 86 Enter the correct SSID Barco knowledge base and YouTube videos Go to the product page on Barco’s website and select in the right column Support. You will get access to Barco’s Knowledge base and Latest tutorial videos. For more YouTube videos, consult https://www.youtube.com/user/barcoTV...

  • Page 87: Environmental Information

    Environmental information R5900022-09 ClickShare CS-100...

  • Page 88: Disposal Information

    Electronic Products” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
  • Page 89 Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “General guidelines of environment-friendly use period of electronic information products” of Chinese Mainland.

  • Page 90: Production Address

    The month and year of production is indicated on the product ID label on the product itself. 9.4 Importers contact information Contact To find your local importer, contact Barco directly or one of Barco's regional offices via the contact information given on Barco's web site, www.barco.com. R5900022-09...

  • Page 91: R5900022-09 Clickshare Cs

    Environmental information R5900022-09 ClickShare CS-100...
  • Page 92 R5900022-09 | 11/07/2018 Barco NV | Beneluxpark 21, 8500 Kortrijk, Belgium Registered address: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com...

Table of Contents