Barco ClickShare CS-100 Installation Manual page 86

Troubleshooting
Problem
Configurator shows error in the
processes "WiFi Access Point
Daemon" and/or "DHCP Server"
ClickShare Base Unit does not
start up correctly
No LAN connection with the Base
Unit
No WiFi connection with Base Unit SSID not correct
Barco knowledge base and YouTube videos
Go to the product page on Barco's website and select in the right column Support. You will get access to
Barco's Knowledge base and Latest tutorial videos. For more YouTube videos, consult
https://www.youtube.com/user/barcoTV
86 R5900022-09 ClickShare CS-100
Cause
Configuration file is corrupted
Configuration file is corrupted
Wrong IP address
and select ClickShare.
Solution
Check out the ClickShare White
paper on WiFi See
www.barco.com/clickshare.
In the Configurator, goes to
Support & Updates, click on
Troubleshoot and press "Reset to
factory defaults".
In the Configurator, goes to
Support & Updates, click on
Troubleshoot and press "Reset to
factory defaults".
IP address is not within your LAN
range.
DHCP is not enabled.
Enter the correct SSID