BOMBARDIER 1996 Ski-doo MX Z440 Handbook page 98

Section 03 CHASSIS PREPARATION
A06G05S
—Place the angle finder on the swing arm near the ski leg housing.
CAUTION : Angle finder must sit square against swing arm. Positioning angle
against a weld bead or decal may result in a false reading.
—Loosen the lock nuts on the upper control arms.
—Unbolt the upper arm at the ski leg housing. Turn the control arm (or bushing) in or
achieve the desired camber angle.
CAUTION : The bushing fits into the ski leg housing in only one direction, therefore
adjustments must be made in one full revolution increments.
A06G12S
TYPICAL
1. Adjustment
2. Camber OO+0.50 (vertical)
—Retorque all nuts and bolts to the proper torque.
—Ski toe out must be checked after any camber adjustments.
03-82
finder
out to