BOMBARDIER 1996 Ski-doo MX Z440 Handbook page 46

There are currently 5 sway bars used on the DSA (F2000 & S2000) chassis :
1 * 11/16" inch diameter bar with integral, non-adjustable end levers.
Used on most F2000 & S2000 chassis.
(While bar is a rather large diameter, it "acts" soft because the end levers are quite long
this
and the bar is also not mounted as rigidly. This sway bar acts similar to the 1/2 inch diameter
adjustable bar with the connector linkages mounted in the softest holes).
2* 1994 MX-Z
1/2 inch diameter bar (hex. ends)
1/2 inch end levers (aluminum with hex. hole)
1/2 inch I.D. plastic bushings
1/2 inch circlips
Screw-Hex. M8 x 30
Flanged Lock Nut M8
3* 1994 Formula Z
5/8 inch diameter bar (splined ends)
5/8 inch end levers (steel with splined hole)
5/8 inch I.D. plastic bushings
Screw-Hex. M8 x 50
Lock Nut M8
Flat Washer M8
4* 1995 Formula Z, Mach 1, Mach Z, MX-Z
1/2 inch diameter bar (splined ends)
1/2 inch end levers (steel with splined hole)
(chrome moly, heavy duty, 94 MX-Z)
(chrome moly, heavy duty, 94 MX-Z)
Tube Support Housing
Set Screw
Rivet
Washer (for rivet)
Tube
Ball Joint
Ball Joint
Hex. Nut MIO
Hex. Lock Nut MIO
5* 3/4 inch diameter bar kit
03-30
5061187 00)
(2) (p/ N 4148785 ()())
(2) (p/ N 3719016 ()())
(2) (p/ N 2220850 65)
(2) (p/ N 2287810 45)
(2) (p/ N 5061206 00)
(2) (p/ N 4148810 00)
(2) (p/ N 2220850 65)
(2) (p/ N 2285810 45)
(4) (p/ N 2240812 01)
(2) (p/ N 5061239 00)
N
(2) (p/ 5061185 ()())
(4) (p/ N 4144408 ()())
(4) (p/ N 3904023 00)
(4) (p/ N 5172259 00)
(2) (p/ N 4147784 00)
(2) (p/ N 4145340 00)
(2) (p/ N 7326100 10)
(4) (p/ N 7326100 42)