BOMBARDIER 1996 Ski-doo MX Z440 Handbook page 81

, A01D04S
TOP VIEW
1. Countershaft
2. Shim position on end bearing housing side
3. Shim position onchaincaseside
4. Drive axle
5. Axial play
6. Shim between sprocket and spacer
If the axle must be shifted left or right, note the direction and distance, and shim the axle as
necessary.
Shims can be placed between the left side bearing and the end bearing housing to move the axle
to the right or between the right side bearing and the chaincase to move the axle to the left.
NOTE : If shims are placed between the chaincase and the right side bearing, an equal
o
thickness shim must be placed between the drive chain sprocket and the spacer on the axle.
1. 501020500 Shim, Drive Axle End Bearing Housing 1.6 mm (.063 in) Thick
2. 414605300 Shim, Drive Axle Chaincase Side 1.6 mm (.063 in) Thick
3. 506041400 Shim, Drive Axle Chaincase Side 1.6 mm (.063 in) Thick
4. 504030700 Shim, Chaincase Perpendicularity 1 mm (.040 in) Thick
5. 504039800 Shim, Chaincase Perpendicularity O.5 mm (.020 in) Thick
2
3
.
4
Section 03
CHASSIS PREPARATION
03-65