BOMBARDIER 1996 Ski-doo MX Z440 Handbook page 72

Section 03 CHASSIS PREPARATION
I
1. Automotive type air pressure hose
2. 2 stage regulator, delivery pressure range 2070 KPa (300 PSI)
3. High pressure cylinder filled with industrial grade nitrogen
4. Valve tip
Reinstall damper spring retainer, then your spring. Next, thread the spring pre-load rings up to the
spring. Set pre-load according to recommended spring length specifications. Your damper is now
ready for reinstallation to your snowmobile.
A06F1DS
1. FACTORY ADJUSTMENT: 1994/1995
Front: L = 85.5 mm (3.0 in)
Center: L = 104 mm (4.0 in)
Rear: L =78 mm (3 11/32 in)
03-56
2
4
1996
Front: L =76 mm (3.0 in)
Center: L = 70.1 mm (2.75 in)
Rear: L = N/A