Pvep Series 4 - Danfoss PVG 16 Service And Parts Manual

Service and Parts Manual
PVG 16/32/128/256
Installation
Pin layout
Type Connector
PVEP 1x6 DEUTSCH
PVEP control specification
Description
Supply Voltage (UDC)
30 | © Danfoss | October 2018
PVEP series 4 for PVG 32
Seals must be correctly set to successfully seal the connector.
PVEP/PVEP-F
8±0.5 Nm
[70±4.4 lbf·in]
5[0.20]
Be sure to protect the LVDT Pin and O-rings are in place during installation. Do not over torque.
The seal in the DEUTSCH connector and the use of 1.5 mm
correctly sealing the connector.
PVEP series 4 for PVG 32 pin layout
1x6 DEUTSCH
3 4
2 5
1 6
Pin 1 Pin 2
PWM_A Error
PVEP series 4 for PVG 32 technical data
Type
Range
Max. ripple
Max. 5 min
PVEP/PVEP-F
2
lines in all connections are crucial for
Pin 3 Pin 4
PWM_B No connection
Value
11 to 32 VDC
5%
36 V
Pin 5 Pin 6
Not used Udc
AX284661889190en-000101