Inserting program elements by key input
Program elements can be inserted by key input.
Procedure
Inserting a normally open contact of "Start1" in the program example, following the procedure below.
A new label can be registered during insertion. Enter the name of a new label on the ladder entry window, and
click the [OK] button. Then, specify the registered destination, class, and data type of the label on the
"Undefined Label Registration" window, and click the [OK] button.
4 PROCEDURES BEFORE OPERATION
36
4.7 Programming
(2)
(1)
1.
Click the insertion position on the ladder editor, and press .
2.
Enter the name, "Start", in the entry field (1). Select "Start1"
from the displayed list (2).
3.
The normally open contact of "Start1" is inserted to the
program.