Fx5Uc Cpu Module; Fx5Uc Cpu Module; Front Panel - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

1.2

FX5UC CPU Module

Front panel

Connector type
[5]
[1]
[4]
[3]
[2]
[1]
[10] [9]
No. Name
[1] Expansion adapter connecting
hooks
[2] Built-in RS-485 communication
terminal block
[3] Built-in Ethernet communication
connector
[4] Operation status display LED
PWR LED
ERR LED
P.RUN LED
BAT LED
CARD LED
SD/RD LED
RD LED
SD LED
[5] Input connector
[6] Extension module connecting hook
[7] I/O display LED
[8] DISP switch
[9] Output connector
1 PART NAMES
16

1.2 FX5UC CPU Module

Spring clamp terminal block type
[11]
[6]
[7]
[8]
[6]
[14]
Description
When connecting an expansion adapter, secure it with these hooks.
Terminal block for connection with RS-485-compatible devices
Connector for connection with Ethernet-compatible devices (with cap)
For details, refer to MELSEC iQ-F FX5 User's Manual (Ethernet Communication).
Indicates whether the CPU module is powered or not.
Lit: Powered
Off: Not powered or hardware error
Indicates the error status of the CPU module.
Lit: Error or hardware error
Flashing: Factory default setting, error, hardware error, or resetting
Off: Operating normally
Indicates the program running status.
Lit: Operating normally
Flashing: Paused
Off: Stopped or stop error
Indicates the battery status.
Flashing: Battery error
Off: Operating normally
Indicates whether an SD memory card can be used or not.
Lit: Can be used or cannot be removed.
Flashing: In preparation
Off: Not inserted or can be removed.
Lit when the CPU module is sending or receiving data through built-in Ethernet communication.
Lit when the CPU module is receiving data through built-in RS-485 communication.
Lit when the CPU module is sending data through built-in RS-485 communication.
Connector for connecting input signal cables.
For details on the terminal layout, refer to MELSEC iQ-F FX5UC User's Manual (Hardware).
When connecting an expansion module, secure it with these hooks.
Lit when the input or output is on.
Switches input/output of the I/O display LED.
Connector for connecting output signal cables.
For details on the terminal layout, refer to MELSEC iQ-F FX5UC User's Manual (Hardware).
When the front covers are open
[17]
[16]
[12]
[15]
[13]