Philips EverFlo Q Service And Technical Reference Manual page 71

8. Disconnect the Compressor wires from the Capacitor.
9. Slightly lift the back of the compressor while threading the blue hose through the hole in the
compressor mounting area in the Front Cabinet.
10. Remove the Compressor from the Front Cabinet.
To install the Compressor
1. While routing the blue hose through the hole in the compressor mounting area, place the
Compressor into the Front Cabinet.
Page 71
Figure 8-24: MOUNTING ROD REMOVAL
Figure 8-25: COMPRESSOR REMOVAL
LO TM
E F S & T
VER ERVICE
I
ECHNICAL NFORMATION
1039055, VER. 06