Figure 8-21: FAN REMOVAL/INSTALLATION AND PROPER ORIENTATION
2. Connect the Cooling Fan Connector to the J9 location of the Main PCA.
3. Secure the wires using the Cooling Fan wire clip.
4. Connect the Main PCA shield to the Front Cabinet locking tab.
5. Install the Rear Cabinet. Refer to the Rear Cabinet/Power Cord Replacement section for more
information.
6. Install the Inlet Filter. Refer to the Inlet Filter Replacement section for more information.
7. Install the Filter Cover. Refer to the Filter Cover Replacement section for more information.
LO TM
Page 68
E
F
S
& T
I
1039055, VER. 06
VER
ERVICE
ECHNICAL
NFORMATION