Philips EverFlo Q Service And Technical Reference Manual page 47

8. Unclip the Main PCA shield from the Front Cabinet and push the PCA toward the bottom of the
cabinet until the power switch clears the front cabinet.
9. Lift Main PCA out of the Front Cabinet.
10. Remove the Power Cord wires from the J3 and J4 locations of the Main PCA.
11. Use a large, flat bladed screwdriver to push in the tabs on the top of the strain relief and the bottom
strain relief to remove the Power Cord from the Rear Cabinet.
Page 47
Figure 8-5: TIE WRAP LOCATION
Figure 8-6: UNCLIP MAIN PCA
Figure 8-7: MAIN PCA REMOVAL
LO TM
E F S & T
VER ERVICE
I
ECHNICAL NFORMATION
1039055, VER. 06