Enabling Btoe For Online Users; Automatically Pairing The Btoe Pc Application With The Phone; Figure 8-17: Ac Btoe Tcp Port - AudioCodes 445HD User Manual

User's Manual
3. From the AC BTOE TCP Port dialog that opens, configure the TCP Port:
The valid range is 1 to 65535.

To change the BToE TCP port on the phone side:

See the Administrator's Manual.
8.1.4

Enabling BToE for Online Users

Note: To enable BToE for online users, the Skype for Business server must be configured to
enable BToE.
8.1.5

Automatically Pairing the BToE PC Application with the Phone

Pairing is automatically performed when the phone's PC port is connected to the PC 'behind' the
phone. See the Administrator's Manual for more information.
Note: Automatic pairing requires BToE PC application Version 2.x.
If the laptop after automatic pairing is disconnected and moved to another location, its
speaker/headset becomes the audio device associated with the Skype for Business client.
If the laptop is manually paired and then relocated, Skype for Business audio will remain through
the phone. It's therefore advisable to pair automatically.
Note: If the BToE PC application has already been manually paired with the phone, as shown
in the section below, and you want to automatically pair, you must delete the old pair code
from the BToE PC application in order to allow BToE automatic pairing:
Version 3.0.4

Figure 8-17: AC BToE TCP Port

109
8. Performing Advanced Operations
445HD IP Phone