Box Contents; Recommended Tools And Materials; Placing The Decals; Battery And Charger - ProBoat AERO TROOPER Instruction Manual

EN

Box Contents

• Pro Boat ® Aerotrooper™ 25-Inch Brushless RTR Air Boat
• Spektrum STX2 ® 2CH Transmitter (SPMSTX200)
• Spektrum MRX200 2CH Receiver (SPMMRX200)
• Pro Boat ® 90A Brushless Marine ESC (DYNM3870)
• Spektrum 3KG Metal, Waterproof 23T Servo (SPMS603)
• Dynamite 2080KV Outrunner Motor (DYNM3954)

Recommended Tools and Materials

• Needle nose pliers
• Paper towel
• Rubbing alcohol
• Phillips screwdriver: #1, #2
• Hex drivers: 1.5mm and 2mm
• Clear tape (DYNM0102)
®
• Pro Boat Marine Grease and Gun (DYNE4200)

Placing the Decals

1. Wipe the boat surface with a clean,
microfiber cloth.
2. Wipe the boat surface with rubbing alcohol,
and customize the Aero Trooper with the
included decals.
Tip: Refer to the boat pictured on the box
for inspiration when customizing your boat.
To order more decals use PRB289004, Decals:
Aerotrooper 25-inch Air Boat.

Battery and Charger

Choose a charger designed to charge the recommended
® ®
Dynamite Reaction 11.1V 5000mAh 3S 50C Li-Po battery
™
with EC3 connectors (DYNB3803EC) or the Dynamite
®
Reaction 14.8V 5000mAh LiPo 4S 50C battery with EC5
connectors (DYN3804EC).
We recommend the Dynamite
AC Charger (DYNC2005CA) or the Dynamite
Sport Plus 50W AC/DC Charger (DYNC2010CA).

Installing the Battery Pack

1. Loosen the two thumbscrews on the battery hatch
and remove it from the hull.
2. Apply one side of the included hook and loop tape to
battery tray. Apply the other side of the hook and loop
tape to the back of the battery.
3. Install the fully charged battery in the compartment
and secure it with the hook and loop tape.
4. Connect the battery to the ESC.
4
®
™
® Prophet ™ Sport LiPo 35W
®
Prophet ™
Refer to your charger manual for charging instructions and
safety information.
NOTICE: Never charge a battery in the boat or damage may
result.
Aerotrooper 25-Inch Brushless Air Boat RTR
2.4GHZ DIGITAL
RADIO SYSTEM