Table of Contents
Advertisement
EN
Box Contents
®
• Pro Boat
ShockWave
®
• Spektrum
STX2
™
®
• Spektrum
STX2
™
®
• Dynamite
30A Brushless 2–3S Marine ESC (DYNM3860)
• Spektrum
3KG 23T Plastic Gear Servo, Waterproof (SPMS603)
™
®
• Dynamite
2000Kv Brushless Marine Motor (DYNM3900)
Recommended Tools and Materials
• Needle nose pliers
• Paper towel
• Rubbing alcohol
• Open-end wrench: 10mm (2)
• Nut driver: 4mm, 5.5mm, 8mm (DYNT0502)
Battery and Battery Charger
This product does not come with a battery. We
recommend the Dynamite ® Reaction ® 7.4V 5000mAh 2S
30C LiPo Hardcase with EC3™ connectors.
This product does not come with a charger. Choose
a charger designed to charge the recomended battery.
We recommend either the Dynamite ® Prophet ™
Antenna Tube Installation
Install the receiver antenna in the tube as shown.
Keep the end of the antenna above the boat's waterline
to get the best transmitter reception. Apply clear tape
(DYNM0102), if desired.
NOTICE: Do not cut or kink the receiver antenna or
damage may result.
4
®
26-Inch Brushless Deep-V Boat
2CH 2.4GHz FHSS Transmitter (SPMSTX200)
2CH 2.4GHz FHSS Receiver (SPMSRX200)
2.4GHZ DIGITAL
RADIO SYSTEM
A battery (sold separately) is required to
operate the boat. The ESC will operate
with 2–3 Cell (7.4V–11.1V) Li-Po or 6–9 Cell
(7.2V–10.8V) Ni-MH/Ni-Cd batteries.
• Phillips screwdriver: #1
• Hex wrench: 1.5mm, 2mm, 2.5mm, 3mm (DYNT0502)
• Clear tape (DYNM0102)
®
• Dynamite
Marine Grease and Gun (DYNE4200)
• Hook and Loop Tape Set, WP 4pcs (DYNK0300)
Sport LiPo 35W AC Charger (DYNC200CA) or the
Dynamite ® Prophet ™ Sport Plus 50W AC/DC Charger
(DYNC2010CA). Refer to your charger manual for
charging instructions and safety information.
NOTICE: Never charge a battery in the boat or damage
may result.
®
ShockWave
26
Advertisement
Table of Contents
