Mec 4069RT Service And Parts Manual page 17

F -W
R E E H E E L
RUNAWAY HAZARD!
AFTER RELEASING THE BRAKES THERE IS NOTHING TO STOP MACHINE
TRAVEL. MACHINE WILL ROLL FREELY ON SLOPES.
ALWAYS CHOCK THE WHEELS BEFORE MANUALLY RELEASING THE BRAKES.
The machine can be winched or towed short distances at speeds not to exceed 5 MPH
(8 km/h). Before towing or winching the machine, it is necessary to release the brakes.
Reset the brakes after towing or winching.
Hand Pump
D B
ISENGAGE RAKES BEFORE
• Chock the wheels.
• Press and hold the Brake Release Valve, then slowly press the Hand Pump button on the
Functions Manifold repeatedly until the brakes release (normally 8-10 full pump strokes).
E B
NGAGE RAKES BEFORE
The brakes reset automatically when the motor is started.
The brakes may be manually applied by pulling the Brake Release Valve out.
BE SURE THAT THE BRAKES ARE ENGAGED BEFORE REMOVING THE WHEEL
CHOCKS.
"4069RT" Service and Parts Manual
C
O N F I G U R A T I O N
T
OWING OR
D
RIVING
F W
O R I N C H I N G O R
Release
Valve
ART_4293
W
INCHING
T
O W I N G
March 2014
Page XI