Server Power Control - Quantum NDX Series User Manual

2.1.4.3 Server Power Control
This feature allows you to configure power management settings for your remote
console. To configure Server Power Control settings, follow the instructions be‐ low.
1. Click <Remote Control> in the Menu bar to invoke the Remote Control Main Page.
2. Click <Server Power Control> to display the Power Control submenu as shown
above.
3. Power Control and Status: This submenu indicates the status and the current power
control settings of the remote server. The status of the remote server are displayed
as below:
Reset Server: Click this radio button to reset the power control settings for
o
the remote server.
Power Off Server - Immediately: Click this radio button to immediately
o
power off the remote server.
Power Off Server - Orderly Shutdown: Click this radio button to power off
o
and shut down the remote server in an orderly manner.
Power On Server: Click this radio button to power on the remote server.
o
Power Cycle Server: Click this radio button to power cycle the remote
o
server.
4. Perform Action: After selecting a power setting from the list above, click this item to
execute the command and perform the action.
Quantum NDX Server BMC/IPMI User's Guide
Chapter 2: Configuring the IPMI Settings
Page 39