Configuration - Remote Session - Quantum NDX Series User Manual

2.1.3.8 Configuration ‐ Remote Session
This feature allows the user to configure remote session settings. When clicking
<Remote Session> in the Options window, the following screen displays.
1. Virtual Media Attach Mode: Click the pull‐down menu to display virtual media attach
modes.

Attach: Select this mode to activate a virtual media to make it
available for remote access. A virtual device will always be seen in
the system BIOS even when it is not active.

Auto Attach (Default): Select this mode to automatically enable
virtual media support and make it available for remote access.
Virtual devices will only be shown in the operating systems and BIOS
when a device or an ISO image is connected through the virtual
media wizard.

Detach: Select this mode to disable virtual media for remote access.
2. Floppy Emulation: Click the pull‐down menu to see the following:

Off (Default): Select this item to disable floppy emulation when you
wish to connect the USB Flash drive via virtual media redirection.

On: Select this item to enable floppy emulation when you wish to
connect a floppy drive or floppy ISO image through virtual media
redirection.
Warning: Be sure to close all Java sessions before changing floppy emulation to
avoid unexpected errors.
Quantum NDX Server BMC/IPMI User's Guide
Chapter 2: Configuring the IPMI Settings
Page 23