Event Log - Quantum NDX Series User Manual

2.1.2.3 . Event Log
This feature allows the user to configure Event Log settings. When you select Event
Log in Options Window the following page will display.
1. From the pull‐down menu select an event category to show the vent log, which
includes the following categories: All Events, Sensor‐Specific Events, BIOS‐Generated
Events, and System‐Management Software Events. In addition to these events, it is
normal to see boot‐up and shutdown events generated by the installed system
software (OS). The table below lists examples of these types of events.
Sensor Type
OS Boot
OS Stop/Shut‐
down
Page 12
A: boot completed
C: boot completed
PXE boot completed
Diagnostic boot completed
CD‐ROM boot completed
ROM boot completed
Boot completed ‐ boot device not specified
Stop during OS load/initialization, Unexpected error
during system startup, Stopped waiting for input or
power
l / t
Run‐time stop (a.k.a 'core dump', 'blue screen')
OS graceful stop (system powered up, but normal OS
operation has shut down and system is awaiting reset
pushbutton, power cycle or other external input)
Chapter 2: Configuring the IPMI Settings
Event
Quantum NDX Server BMC/IPMI User's Guide