Chapter 3: Frequently Asked Questions
Question: How do I flash the IPMI firmware?
Answer:
1. Log in the IPMIcfg utility by entering the system IP address.
2. Click the <Maintenance> button. Browse the files to select a correct file to flash the
firmware.
3. Click the <Update Firmware> button to proceed with firmware flashing.
Question: How do I set up the IP address and MAC address for remote access?
Answer:
1. Boot the system into DOS.
2. Run the utility‐IPMICFG from DOS.
3. Follow the prompts to set up the IP address and MAC address for remote access.
You can also go to the BIOS to configure the IP address.
Quantum NDX Server BMC/IPMI User's Guide
Chapter 3: Frequently Asked Questions
Page 45