Preface
About this User's Guide
This user guide is written for system integrators, PC technicians and
knowledgeable PC users who intend to configure the IPMI settings supported by the
Nuvoton WPCM450 BMC Controller embedded in the motherboard in Quantum's NDX
servers. It provides detailed information on how to configure the IPMI settings supported
by the Nuvoton WPCM450 chip.
Note: Nuvoton Technology is a subsidiary of Winbond Corp.
User's Guide Organization
Chapter 1 provides an overview to the Nuvoton WPCM450 Controller. It also introduces
the features and the functionality of IPMI.
Chapter 2 provides detailed instructions on how to configure the IPMI settings supported
by the embedded WPCM450 Controller.
Chapter 3 provides the answers to frequently asked questions.
Conventions Used in the User's Guide
Special attention should be given to the following symbols for proper IPMI
configuration.
Warning: Important information given to avoid IPMI configuration errors.
Note:
Additional Information given to ensure correct IPMI configuration and
proper system setup.
Contacts
Quantum Corporate Headquarters
To order documentation or other products contact: Quantum Corporation
(Corporate Headquarters)
1650 Technology Drive, Suite 700
San Jose, CA 95110-1382
Quantum Home Page
Visit the Quantum home page at:
http://www.quantum.com
For further assistance, or if training is desired contact the Quantum Service
Support Center: