Activating Windows Operating System; Setting Date /Time On Server; Configuring Networking - Quantum NDX Series Quick Start Manual

NDX NAS Quick Start Guide
Activating Windows
Operating System
Setting Date /Time on
Server
Configuring
Networking
4
Note: You must be connected to the internet to complete Windows activation.
If the Activate Windows section of the screen is viewable, then Windows is not yet
activated. Follow the steps below to activate Windows:
1 Choose Activate Windows Online.
The Activation Successful dialog box displays.
2 Click Close.
1 Click Set Time Zone to set the correct time and time zone.
2 Click Change Date and Time to set the time.
3 Click Change Time Zone to set your time zone.
4 Click OK in each dialog box when done.
Network settings are automatically configured in Windows Storage Server Workgroup
2008 R2 using DHCP to assign IP addresses by default.
To configure a static IP address, do the following:
1 From the Initial Configure Tasks screen, click Configure Networking (see
Note: Alternately, in Server Manager click View Network Connections.
2 Right click the network connection that you want to configure, and select
Properties.
3 Double click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
4 On the General tab, click Use the following IP address.
5 In the IP address field, type the IP address that you want to use.
6 Press the Tab key to place the cursor in Subnet mask.
A default value for subnet mask is entered automatically.
7 Either accept the default subnet mask, or type the subnet mask that you want to
use.
8 In Default gateway, type the IP address of your default gateway.
9 In Preferred DNS server, type the IP address of your DNS server. If you plan to use
the local computer as the preferred DNS server, type the IP address of the local
computer.
10 In Alternate DNS Server, type the IP address of your alternate DNS server, if any. If
you plan to use the local computer as an alternate DNS server, type the IP address of
the local computer.
11 Click OK, and then click Close.
Figure
Other Initial Configuration Options
1).