Using Ie* To Access The Bmc/Ipmi Settings From Your Computer; To Log In - Quantum NDX Series User Manual

2.1.1 Using IE* to Access the BMC/IPMI Settings from Your Computer

You can access BMC/IPMA settings through Microsoft Internet Explorer. This section
describes how.
2.1.1.1 To Log In
Once you are connected to the remote server, the following screen will display.
1. Enter your Username.
2. Enter your Password and click <Login>.
3. The Home Page will display on the next page.
Note 2: The manufacturer default username and password are ADMIN. Once you
have logged into the BMC using the manufacturer default password, be sure
to change your password for system security.
Note 3: For IPMI to work properly, please enable all onboard USB ports and the COM
port designated for SOL (IPMI) on the motherboard. All USB ports and the
COM port for IPMI are enabled in the system BIOS by default. The COM
port for IPMI is marked with "*" in the BIOS. It is usually listed as COM2 or
COM3 in the BIOS.
Quantum NDX Server BMC/IPMI User's Guide
Chapter 2: Configuring the IPMI Settings
Page 5