Configuration - Active Directory - Advanced Settings - Quantum NDX Series User Manual

2.1.3.5 .a Configuration ‐ Active Directory ‐ Advanced Settings
This feature allows the user to configure Active Directory‐Advanced settings. When you
click <Active Directory> in the Options window and checked the Enable box indicated
on the previous page, the following screen will display.
1. Active Directory: Click this item and check the Enable box on the previous page to
configure Active Directory settings.
2. Check the Enable box to enable Active Directory Authentication.
3. User Domain Name: This item allows the user to enter the user domain name.
4. Time Out: This item displays the Time‐out settings.
5. Domain Controller Server Addresses 1~3: These items allow the user to enter the IP
addresses for the Domain Controller Servers 1~3.
6. Default Active Directory Certificate: This item displays the information of the default
active directory certificate.
7. Upload New Default Active Directory Certificate: Click <Browse> to select and
upload the new default active directory certificate.
After the required information is entered, click <Save> to save the information you've
entered or click <Cancel> to cancel it.
Page 20
Chapter 2: Configuring the IPMI Settings
Quantum NDX Server BMC/IPMI User's Guide