2.1.3.9 Configuration ‐ SMTP Settings
This feature allows the user to configure SMTP (Simple Mail Transfer Protocol) settings
for email transmission through the network. When you click <SMTP> in the Options
window, the following screen will display.
1. SMTP: Check this item to configure SMTP (Simple Mail Transfer Protocol) settings for
email transmission across the IP network.
2. Mail Server IP: Enter the SMTP Mail Server IP address for your network in the box.
3. Mail Sender Address: Enter the mail sender address that you would like the alert to
show as "sent from."
4. Mail Server Port: Enter the mail server port number. The default port is 25 for most
servers.
5. Save: Click this item to save any changes to the SMTP setting.
Page 24
Chapter 2: Configuring the IPMI Settings
Quantum NDX Server BMC/IPMI User's Guide