Configuration - Network Settings - Quantum NDX Series User Manual

2.1.3.7 Configuration ‐ Network Settings
This feature allows you to configure network settings. When you click <Network> in the
Options window, the following screen will display.
1. Network: This item allows you to view or modify network settings.
2. MAC Address: Enter the MAC address for your network.

Check the first radio button to obtain an IP address automatically by
using DHCP (Dynamic Host Configuration Protocol).

Check the second radio button to use the IP address entered below.
3. IP address: If the second radio button above is checked, enter your IP ad‐ dress in
the box.
4. Subnet Mask: Enter the address for the subnet mask of your network.
5. Default Gateway: Enter the IP address for the default gateway of your net‐ work.
6. Primary DNS Server: Enter the IP address of your primary domain name server.
7. Secondary DNS Server: Enter the IP address of your secondary domain name server.
8. Enable VLAN: Check this box to enable Virtual LAN support
9. VLAN Tag: This item allows you to use VLAN Tagging or Frame Tagging to encapsulate
specific data, so it can be transparently transmitted through multiple platforms
without leaking any information. After configuring network settings, click <Save> to
save the configuration.
Page 22
Chapter 2: Configuring the IPMI Settings
Quantum NDX Server BMC/IPMI User's Guide