Examples; Flashing The Bmc Firmware In The Windows; Environment - Quantum NDX Series User Manual

Examples

Example 1
/Yafukcs ‐info rom.ima
Description: This command displays the details of both existing and new firm‐ ware.
Example 2
/Yafukcs ‐full rom.ima
Description: This command starts flashing the new rom.ima to the firmware.
Example 3
/Yafukcs ‐full ‐force‐boot rom.ima
Description: This command starts flashing the new rom.ima to the firmware using
"FORCE BootLoader upgrade."

3. Flashing the BMC Firmware in the Windows

Environment

YAFUFlash is used to flash the BMC firmware in Windows through USB or Network
connections. To flash the BMC in Windows, follow the instructions below.
1. Open Command Prompt. Go to YafuFlash\Windows\path.
2. The following two files will be displayed:
Yafuflash.exe
o
LIBIPMI.dll
o
3. Run "Yafuflash.exe" in the command prompt.
4. Use the settings as listed below.
Quantum NDX Server BMC/IPMI User's Guide
Appendix A:
Page 47