Maintenance - Quantum NDX Series User Manual

2.1.5 Maintenance

Use this feature to manage and configure IPMI devices. Follow the instructions below
to configure Maintenance settings.
1. Click <Maintenance> in the Menu bar to display the Maintenance page.
2. Click <Firmware Update> to update the BMC firmware (the BIOS) of the remote
server. The Firmware Update screen is shown in the next section.
3. You can also press <Unit Reset> to reboot the BMC (IPMI) Controller.
Page 40
Chapter 2: Configuring the IPMI Settings
Quantum NDX Server BMC/IPMI User's Guide