Pcie Mezzanine Card - Dell PowerEdgeFC430 Owner's Manual

Figure 14. Installing the memory module
1 memorymodule
3 memorymodulesocketejector (2)
Next steps
1 Install the coolingshroud.
2 Followthe procedure listed inthe After working inside your systemsection.
Press F2 to enter System Setup, and check the System Memory setting.
3
The system should have already changed the value to reflect the installed memory.
4 If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory module is firmly
seated in the memory modulesocket.
5 Runthesystem memorytestinsystemdiagnostics.
Related links
Safety instructions
Before working inside your system
Removing the cooling shroud
Installing the cooling shroud
After working inside your system
Removing memory modules

PCIe mezzanine card

Thesledsupportsonex8PCIeGen3mezzaninecard.ThePCIecardprovidesaninterfacebetweenthesledandexternalstoragedevices.
NOTE: Ensure that the PCIe mezzanine card is set to Enabled in System Setup.
NOTE: The PCIe mezzanine card slot is available for use only when CPU2 is installed.
62 Installing and removing sled components
2 alignment key