Front Panel View-Dual Ssd System - Dell PowerEdgeFC430 Owner's Manual

Figure 2. Front panel view—single SSD system
1 USB port
3 SSD
5 Sled power-on indicator, power button
Table 1. Front panel features and indicators—single SSD system
Item Indicator, button, or
connector
1 USB connector
2 USB management port or
iDRAC Direct port
3 SSD
4 QSFP+ connector (2)
5 Sled power-on indicator,
power button
Front panel view—dual SSD system
The following figure and the table describes about the dual SSD system features and its indicators.
8 PowerEdge FC430 system overview
Icon Description
Enables you to connect USB devices to the sled. This port is USB 3.0
compliant.
Enables you to connect USB devices to the sled or provides access to
theiDRACDirectfeatures.FormoreinformationaboutiDRAC, seethe
iDRAC Guide at Dell.com/idracmanuals. This port is USB 2.0
compliant.
A single 1.8-inch hot-swappable uSATA SSD is supported in this chassis.
The QSFP+ connectors can be used for Infiniband or for Ethernet.
The power-on indicator turns on when the sled is turned on. The power
button controls the power supply output to the system.
2 USBmanagementportoriDRACDirectport
4 QSFP+ connector