CAUTION: For processors of 105 W, 120 W, or 135 W, use heat sinks of 68 mm width.
CAUTION: For processors of 105 W (for acoustic configuration), 135 W (four cores, six cores, or
eight cores), or 145 W, use heat sinks of 104 mm width.
NOTE: Mixing processors of different wattages is not supported.
System battery specifications
The PowerEdge FC630 system supports CR 2032 3.0-V lithium coin cell system battery.
Memory specifications
The PowerEdge FC630 system supports DDR4 registered DIMMs (RDIMMs) and load-reduced DIMMs
(LRDIMMs).
Table 8. Memory specifications
Memory module
Memory capacity
sockets
64 GB quad rank
(LRDIMMs)
32 GB quad rank
(LRDIMMs)
PowerEdge FC630
4 GB, 8 GB, 16 GB
or 32 GB single
rank (RDIMMs)
8 GB, 16 GB and 32
GB dual rank
(RDIMMs)
RAID controllers
The PowerEdge FC630 system supports PERC H730P, PERC H730, PERC H330, and PERC H730P slim
card .
PCIe mezzanine card slots
The PowerEdge FC630 system supports One PCIe x16 Gen 3 slot that supports PCIe mezzanine card
Minimum RAM
Maximum RAM
•
4 GB with single
•
processor
Speed
2400 MT/s, 2133
MT/s, or 1866
MT/s, DDR4
DIMMs
2133 MT/s, or 1866
MT/s,, DDR4
Up to 768 GB
DIMMs
with a single
processor
2400 MT/s, 2133
Up to 1536 GB
with a dual
MT/s, or 1866
processor
MT/s, DDR4
DIMMs
2400 MT/s, 2133
MT/s, or 1866
MT/s, DDR4
DIMMs
19